【英文标准名称】:StandardSpecificationforGeneralRequirementsforSpecializedCarbonandAlloySteelPipe
【原文标准名称】:专用碳素钢和合金钢管一般要求的标准规范
【标准号】:ASTMA530/A530M-2004a(2010)
【标准状态】:现行
【国别】:美国
【发布日期】:2004
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.09
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:alloysteelpipe;carbonsteelpipe;generaldeliveryrequirements;steelpipe;Alloysteelpipe--specifications;Carbonsteelpipe--specifications;Generaldeliveryrequirements--steel;Hydrostaticpressuretest
【摘要】:1.1Thisspecificationcoversagroupofrequirementswhich,withtheexceptionsofSection5.3,Section13,Section20,andSection21,aremandatoryrequirementstotheASTMpipeproductspecificationsnotedbelowunlesstheproductspecificationspecifiesdifferentrequirements,inwhichcasetherequirementoftheproductspecificationshallprevail.1.2Sections5.3or20aremandatoryiftheproductspecificationhasarequirementforproductanalysisorflatteningtests.1.3Section21ismandatoryiftheproductspecificationhasahydrostatictestrequirementwithoutdefiningthetestparameters.1.4Section13isforinformationonly.1.5Incaseofconflictbetweenarequirementoftheproductspecificationandarequirementofthisgeneralrequirementspecification,onlytherequirementoftheproductspecificationneedbesatisfied.
【中国标准分类号】:H48
【国际标准分类号】:23_040_10
【页数】:9P.;A4
【正文语种】:英语
基本信息
标准名称: | 含添加剂石油蜡(热熔胶)表观粘度测定法 |
英文名称: | Standard test method for apparent viscosity of petroleum waxes compounded with additives(hot melts) |
中标分类: |
石油 >>
石油产品 >>
石油蜡 |
ICS分类: |
石油及相关技术 >>
石蜡、沥青材料和其他石油产品:
|
替代情况: | 替代SH/T 0018-1990 |
发布部门: | 中华人民共和国国家发展和改革委员会 |
发布日期: | 2007-08-01 |
实施日期: | 2008-01-01 |
首发日期: | |
作废日期: | |
归口单位: | 石油蜡类产品标准化技术归口单位 |
起草单位: | 中国石化抚顺石油化工研究院 |
出版社: | 中国石化出版社 |
出版日期: | 2008-01-01 |
页数: | 8 |
适用范围
本标准规定了含添加剂石油蜡(热熔胶)表观粘度的测定方法,适用于温度低于175℃时表观粘度于20Pa·s的液态热熔物。
本标准规定以国际单位制作为标准计量单位。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 石油 石油产品 石油蜡 石油及相关技术 石蜡 沥青材料和其他石油产品:
【英文标准名称】:Aerospaceseries-Insert,thinwall,self-locking,short,inheatresistingnickelbasealloyNI-PH2601(NI-P100HT,Inconel718),silverplatedoninternalthread,forsalvageofcomponents;GermanandEnglishversionEN3913:2007
【原文标准名称】:航空航天系列.部件修复用内螺纹镀银、NI-PH2601(Ni-P100HT,Inconel718)型耐热镍基合金、短自锁薄壁嵌镶件
【标准号】:DINEN3913-2008
【标准状态】:现行
【国别】:德国
【发布日期】:2008-03
【实施或试行日期】:
【发布单位】:德国标准化学会(DE-DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:航空航天运输;航空运输;航空器;合金;化学成分;设计;名称与符号;尺寸;电极;紧固件;耐热材料;高温;因康;材料;MJ螺纹;多语种的;镍;镍合金;镍基合金;特性;检修;修复;止推座(有螺纹);航天运输;规范(验收);钢;表面处理;薄壁;螺纹嵌镶件;螺纹
【英文主题词】:Aerospacetransport;Airtransport;Aircraft;Alloys;Chemicalcomposition;Design;Designations;Dimensions;Electrodes;Fasteners;Heat-resistantmaterials;Hightemperature;Inconel;Materials;MJ-threads;Multilingual;Nickel;Nickelalloys;Nickelbasealloys;Properties;Repairs;Rework;Sockets(threaded);Spacetransport;Specification(approval);Steels;Surfacetreatment;Thin-walled;Threadinserts;Threads
【摘要】:Thisstandardspecifiesthecharacteristicsofshort,self-locking,thinwallsalvageinsertswithsilverplatedinternalthread,inNI-PH2601(NI-P100HT),foraerospaceapplications.Maximumtesttemperature550℃.
【中国标准分类号】:V20
【国际标准分类号】:49_030_30
【页数】:14P.;A4
【正文语种】: