您的位置: 标准下载 » 国内标准 » 行业标准 »

DL/T 5381-2007 水电工程水库库底清理设计规范

时间:2024-05-06 03:17:04 来源: 标准资料网 作者:标准资料网 阅读:8094
下载地址: 点击此处下载
基本信息
标准名称:水电工程水库库底清理设计规范
英文名称:Design specifications for cleaning of reservoir zone of hydroelectric project
中标分类: 工程建设 >> 水利、水电工程 >> 水利、水电工程综合
ICS分类: 能源和热传导工程 >> 水力工程
发布部门:中华人民共和国国家发展和改革委员会
发布日期:2007-07-20
实施日期:2007-12-01
首发日期:
作废日期:
归口单位:电力行业水电规划设计标准化技术委员会
起草单位:水电水力规划设计总院
出版社:中国电力出版社
出版日期:2007-12-01
页数:22页
适用范围

本标准规定了水电工程水库库底清理设计的原则、项目、程序、深度和方法。
本标准适用于大中型水电工程(含抽水蓄能电站)建设征地移民安置的预可行性研究报告阶段、可行性研究报告阶段及移民安置实施阶段的水库库底清理设计工作。

前言

没有内容

目录

前言 1 范围 2 规范性引用文件 3 总则 4 库底清理范围 5 库清理项目 6 卫生清理 7 建(构)筑物清理 8 林木清理 9 特殊清理 10 库底清理组织实施计划 11 各阶段工作要求 附录A (规范性附录) 库底清理工程量汇总 条文说明

引用标准

没有内容

所属分类: 工程建设 水利 水电工程 水利 水电工程综合 能源和热传导工程 水力工程
基本信息
标准名称:硅晶体中间隙氧含量径向变化测量方法
英文名称:Testing method for determination of radial interstitial oxygen variation in silicon
中标分类: 冶金 >> 半金属与半导体材料 >> 半金属与半导体材料综合
ICS分类: 电气工程 >> 半导体材料
替代情况:替代GB/T 14144-1993
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-10-30
实施日期:2010-06-01
首发日期:1993-02-06
作废日期:
主管部门:全国半导体设备和材料标准化技术委员会材料分技术委员会
提出单位:全国半导体设备和材料标准化技术委员会
归口单位:全国半导体设备和材料标准化技术委员会材料分技术委员会
起草单位:峨嵋半导体材料厂
起草人:杨旭、江莉
出版社:GB/T 14144-1993
出版日期:2010-06-01
页数:12页
计划单号:20062373-T-469
适用范围

本标准适用于室温电阻率大于0.1Ω·cm 的n型硅单晶和室温电阻率大于0.5Ω·cm 的p型硅单晶中间隙氧含量的测量。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T1557 硅晶体中间隙氧含量的红外吸收测量方法
GB/T14264 半导体材料术语

所属分类: 冶金 半金属与半导体材料 半金属与半导体材料综合 电气工程 半导体材料
Product Code:SAE J2836/4
Title:Use Cases for Diagnostic Communication for Plug-in Vehicles
Issuing Committee:Hybrid - Ev Committee
Scope: This SAE Information Report J2836/4 establishes diagnostic use cases between plug-in electric vehicles and the EV Supply Equipment (EVSE). As Plug-In Vehicles (PEV) are deployed and include both Plug-In Hybrid Electric (PHEV) and Battery Electric (BEV) variations, failures of the charging session between the EVSE and PEV may include diagnostics particular to the vehicle variations. This document will describe the general information required for diagnostics and J2847/4 will include the detail messages to provide accurate information to the customer and/or service personnel to identify the source of the issue and assist in resolution. Existing vehicle diagnostics can also be added and included during this charging session regarding issues that have occurred or are imminent to the EVSE or PEV, to assist in resolution of these items.
Rationale: This SAE Information Report J2836/4 establishes diagnostic use cases between plug-in electric vehicles and the EV Supply Equipment (EVSE). As Plug-In Vehicles (PEV) are deployed and include both Plug-In Hybrid Electric (PHEV) and Battery Electric (BEV) variations, failures of the charging session between the EVSE and PEV may include diagnostics particular to the vehicle variations. This document will describe the general information required for diagnostics and J2847/4 will include the detail messages to provide accurate information to the customer and/or service personnel to identify the source of the issue and assist in resolution. Existing vehicle diagnostics can also be added and included during this charging session regarding issues that have occurred or are imminent to the EVSE or PEV, to assist in resolution of these items.